Fence Repair Tips From Real Contractors

Fence repair can be a costly burden at times. But it doesn’t have to, since getting to home improvement can let you benefit from the cool relaxing outdoor temperature as well as the soft loamy soil and the need to get things done. In our article we will look at some tips to help you get your repair on the way without much of a hassle.

First, we will look at replacing your posts. After time has passed, fence repair becomes a must, this is due to posts becoming sunken or unseated due to loosened soil. Some posts can even become weak from physical damages or severe rotting, and these require the most effort since they provide support for other parts of your fence. After removal, you should aim to position the new post in a way which doesn’t cause them to become unseated.

Next, we will look at removing damaged wood. As significant time passes, wood becomes damaged even though they can have a span of up to 30 years and more, and sections of your fence can therefore become worn down. Removal of the bad sections should be carefully done since they can further preserve the remaining material which is still good and they make it easier to add new pieces in which match the damaged ones.

Another important tip is to shore up the weakened parts of your fence. While performing any fence repair, it is essential to use additional pieces of wood to help support the sagged sections of your already existing fence. However, even though this may not be appealing, it is a quick fix as opposed to an entire fence replacement.

Next on our list is wire tightening. Since wire fences are more common, tightening the fence wire aids in fixing holes as well as anchoring splices becomes easier. A tip for this process, coming from a Virginia Beach fencing contractor and their Chesapeake VA branch is that claw hammers can help execute your task faster than that of a fence stretcher.

In the case of gate sagging (see video below), these can pull on your panels in the surrounding area, and after time, your fence becomes uneven. One simple way to prevent damage is to simply use wheels, they can be attached to the side of your gate and they will basically take the strain off of your gate and stop pulling in the future.

Another way to deal with this issue is to simply remove your lower hinges and put shims which match to raise the lower areas, the hinge is however reattached and this will ensure the bottom of the gate is set to that of the top level.

Our last and most important tip is to always ensure that you are safe. Fence repair should always be done in groups of two, this helps a great deal for making your task easier and also significantly reduces injury. Another benefit is that a second person can spot small mistakes that the other person didn’t pick up on.

In conclusion, we have just looked at some very useful and insightful tips to help get your fence repair on the way. Remember, always ensure that you wear the appropriate equipment for safety at all times. And, don’t forget, working at a slower pace readily prevents damage.